VibeDrums Feel The Good Vibes
About the Mini
*8 Notes - 1 Bass / 1 Mid-range and 6 High Notes
*13 Gauge Steel: On the playing heads which improves resonance, tuning longevity and overall durability over the thinner 14 gauge used to make other drums of this type.
*Painting: The drum is double “Powder Coated” with a new exotic color that Sparkles and changes with the light. This 2 coat system makes the drum much more durable & scratch resistant than standard powder coats.
*Resonance: The Parabolic resonance Chamber combined with our high quaiity 13 gauge steel creates a drum with optimal resonance for its size.
*Harmonics: The playing tabs are perfectly spaced for optimum playability and harmonics between the other notes
Versatile: Can be used for playing, meditation as well as Therapeutic Treatments.
Lightweight, for ease in transportation, without loss of sound
9.75” Mini- only 3.1 Lbs (1.4 Kilos)
Super Slim Design so it will fit into your knapsack or rucksack.
Mini - 2.25 inches total height by 9.75 inch diameter (6 cm x 25.4cm)
Octagonal notes to maximise the "sweet spot"
The Mini-Vibedrum was developed for a couple of reasons.
One is for people that have limited space and limited funds because the Mini-Vibedrum is super compact and will even fit into a purse.
The second main reason is for those who use the Vibedrum for “On the Body” healing and massage. Because of the small size it can be easily placed on parts of the body that are difficult for the Single VibeDrum.
I took the best of our high notes and combined it with one mid-range note and one bass note, for contrast, to create the best possible note combination for this size and depth of drum.
As I have learned there is Steel and there is Steel This is why I have chosen to use AISI certified Medical Grade Stainless Steel In addition instead of using the less expensive thin 14 gauge steel I use the thicker 13 gauge which increases resonance, increases the durability and the drum stays in tune longer plus you don’t have to worry about rust forming on the inside of the drum
We have switched from an Automotive Spray Paint to a Powder-Coat Paint mostly because powder-coat does not contain any VOC's (volatile organic compounds) in it so it is more environmentally friendly.
We discovered a very unique, high quality powder that is applied in 2 steps with two separate powders that react with each other when combined and produces a 3H to 4H scratch resistance rating. This does not mean that you cannot scratch them but it does make them more scratch resistant than most other powders.
Shape: We chose a octagonal shape (patent pending) for our notes, even though it is much more costly to cut, for three basic reasons. The first is because in our opinion they just look better than the big rectangles or 2 joined curved lines. The second is it focuses your attention on the "Sweet Spot" of the note which is dead center. And Third because the octagonal shape allows us to cut 9 notes into the drum while still allowing a large space between the notes which helps to reduce harmonic distortion and interference with the other notes.
Spacing: The spacing of the notes is important. If you have a lot of notes jammed in very close to each other when you strike one note it will partially activate the notes next to it, which causes a certain amount of harmonic distortion and interference. Our unique octagonal shape allows us to fit in 8 notes while still allowing plenty of space horizontally and vertically between them.
Mini-Vibe Stardust Stardust
Mini Side View